Fractional CO2 Laser 10600nm Scar Removal Laser Medical Equipment Skin Resurfacing Scar Removal Vaginal Tightening Clinic Use Lasers

• Customization: Available
• Type: Laser Beauty Equipment
• Theory: Laser
• Portable: Non Portable
• Laser Wavelength: 10600nm
• Machine Power: 60W
• Target Wavelength: 635nm
• Power of Target Optical Max: 5MW
• Focal Spot: 0.25mm
• Output Power: Max30W
• Scan Mode: 7
• Package Size: Machine: 75*45*130cm, Handle: 32*90*18cm
• Voltage: 220V~50Hz/110V~60Hz
• Gross Weight: 98kg
• Transport Package: Aluminum Box and Thick Sponge
• Specification: CE ISO
• Trademark: OW
• Origin: Beijing China
• HS Code: 8543709990
• Production Capacity: 100sets/Month

Product Description

Product Description

 

NEWEST CO2 BEAUTY MACHINE

Principle:

CO2 laser is a common cosmetic treatment. It is often used in skin treatments such as removing moles, flat warts, and acne scars. It can also be used for facial rejuvenation such as wrinkle removal. It is a minimally invasive laser treatment technology. Traditional The recovery period of carbon dioxide laser treatment is longer and the damage is greater, while ultra-pulse carbon dioxide fractional laser not only has a significant effect of exfoliation treatment, but also has the advantages of short recovery period and less damage of non-ablative treatment.
CO2 laser can be understood as a laser excited from CO2 gas under special equipment. CO2 laser has been used as a medical laser for several decades. Its principle of action is that after the water in the tissue absorbs the energy of the laser, it is heated into water vapor, resulting in vaporization and exfoliation. The remaining heat can coagulate, seal blood vessels, and stimulate blood vessels. Regeneration of collagen types I and III.

Because of the vaporization and exfoliation of the epidermis, the CO2 laser is called an exfoliation laser. It will cause scabs, so that the skin will not break or stand, and promote the repair and reconstruction of the skin. A large number of clinical studies have shown that the single treatment effect of ablative laser is better than that of non-ablative laser, which can greatly shorten the course of treatment and save time and cost for patients.Utilizing the physiological characteristics of epithelial cells that can crawl, the lattice technology produces tiny light beams arranged in an array, leaving normal skin between the light beams. Therefore, after the thermal damage caused by the laser, the surrounding normal tissue can start the horizontal repair mechanism, the epithelial cells can crawl quickly, accelerate the recovery of the damaged skin, and rearrange the proliferation of collagen fibers and elastic fibers. Therefore, the use of fractional technology for CO2 lasers has the advantage of less downtime and fewer side effects.
In addition to the arrangement of the beam, the factors that affect CO2 laser damage to the skin are the irradiation time of the laser, that is, the pulse width. Only CO2 lasers with a pulse width less than 2000us can be called ultra-pulse CO2 lasers. During the treatment, only the expected tissue reactions of vaporization and exfoliation will be produced, without charring and scarring.

Function:
1. Tighten pores
2. Remove fine lines and wrinkles, improve deep wrinkles
3. Repair sunburned skin on the face, neck, shoulders and hands
4. Repair surgical scars and reduce the probability of vascular disease
5. Reduces hyper-pigmentation (dark pigmented or brown patches on the skin), age spots and blemishes, acne, birthmarks.
6. Securely tighten the vagina

Detailed Photos

The machine has four modes to choose from.

The handle of the machine can be stretched 360 degrees, which is more convenient for treatment.
The main dot matrix function has seven graphics to choose from, which is more efficient and convenient.

 

Product Parameters

Laser wavelength	10600nm
Machine power	60W
Wavelength of the target	635 nm
Power of target optical	≤ 5mw
Diameter of focal spot	0.25mm
Area of focal spot	0.05mm2
Output power	≤30W (optional)
Operating voltage	AC 220V ± 10%, 50Hz
Graphic area	≤ 20mm × 20mm
Mode of Spot	Single-mode
Operation	Intermittent and continuous work
Scan mode	Switching: order, disorder, parallel
Refrigeration system	Air-cooled and water
Optical system	7 articulated arms
Output mode	Super-pulse dot-matrix
Output graphic	Triangle / square / rectangle / circle/ Oval / hexagon / linear (scalable)
Package size	Machine: 75*45*130CM Handle: 32*90*18CM
Gross weight	98kg

 

Our Advantages

 

Advantage
1. CO2 Fractional laser is the most advanced conceptual fractional CO2 skin peeling laser system with a wavelength of 10600nm. In addition to its fine skin-peeling effect, it can effectively penetrate the laser beam into the dermis.

2. Laser machine has 2 kinds of operating system; one is fractional co2 laser for scars removal, skin rejuvenation, stretch marks removal.

3. And another system is for vaginal rejuvenation. It has 2 probes. On the probe there is 2940 lens, so it is mixture of 10600nm & 2940nm light. This system only has 2 shapes: round & square. 

Features

A. Laser generator is imported from USA, which has higher energy and stable working condition. The power source of this machine is made by Coherent, USA Company. 
B. The metal tube can work for a long time without changing new tube.
C. Better removing small pox scars, skin excrescence with smaller side-effects.
D. Laser cutting head can do cutting treatment in surgery.

After Sales Service

We provide high-quality after-sales service with a one-year warranty.

FAQ

Q1. Are you manufacture or trading company?
A1: We are 11 years manufacture, can meet all your custom needs, like screen design, language, logo, package, etc.

Q2. How to deliver is usually the most convenient way?
A2: Usually used DHL / TNT air transport, the general time is 3-5 days, you only need to wait for the receipt at the address you fill out.

Q3. How to protect machine safety during transportation?
A3: We use thick foam lining, moisture-proof cloth bag, aviation aluminum box, three-layer packaging to ensure safe transportation of the machine.

Q4: How do I learn to use and routinely maintain the machine?
A4: We have online teaching videos and a professional technical support team to solve your problems for you 24 hours.

Company Profile